Care and safety
Keep ventilation clear and clean, store and move the equipment safely.
Routine cleaning and checks
- Do: Follow the shutdown procedure, allow 30 minutes for cooling, then clean the outside with a soft cloth slightly dampened with clean water.
- Do not: Do not use detergents, a hose or a pressure washer. Do not open the enclosure.
- Check regularly: Check that ventilation openings are clear, the surrounding area is free of clutter, and external cables and fixings are intact.
INFO
Stop using damaged equipment
Do not charge or discharge a damaged battery, or attempt internal repairs yourself.
Long-term storage
Check suitable storage conditions
Choose a dry, clean, ventilated location away from direct sunlight and heat sources. The recommended battery storage temperature is 15–30°C.
Shut down completely before removal for storage
Disconnect all external connections in the correct order and keep the original packaging.
Contact support if storage will exceed 6 months
The full manual recommends periodic assessment and recharging to 65%–75% SOC. Confirm a suitable charging arrangement first, and avoid prolonged storage at a low state of charge.
Moving and reinstalling
Shut down completely and disconnect external connections before moving the equipment. Use the original packaging where possible. Keep it dry and avoid drops, impacts and tipping.
- Main unit: approx. 44.9 kg: Take the weight into account and use suitable handling aids.
- Battery: approx. 36.1 kg: Do not pull on cables or strike the battery connectors.
INFO
Check everything again when reinstalling
Recheck the location, clearances, Bottom Connector and fixings before reconnecting power.
Damage, water ingress or smoke
DANGER
Move away immediately if there is smoke, fire or a serious abnormality
Evacuate people and contact the local fire or emergency services. Do not approach, open or continue using the equipment. Disconnect the external supply only if it is safe to do so.
- Water ingress or flooding: Do not enter water to touch the equipment, cables or connectors. Do not reuse flooded equipment; contact technical service personnel.
- Damaged enclosure or leakage: Stop using the equipment. Do not touch leaked material, or charge or discharge a damaged battery. If exposed to electrolyte, rinse immediately with clean water and seek medical attention promptly. Contact support to arrange handling of the equipment.
Recycling and disposal
Batteries and electronic equipment must not be disposed of with household waste. Contact your supplier or an approved local recycling provider and follow the applicable requirements in the Netherlands.