Overview, Monitoring & Alarms

Home

Summary Information

The home summary page is used to display the overall operation of all power stations bound to the account. The system automatically aggregates and summarizes the relevant data.

The indicators are explained as follows:

Total Installed Energy Storage Capacity：The sum of the total battery capacities filled in the “Power Station Basic Information” of all power stations.

Total PCS Power：The sum of PCS installed powers filled in the “Power Station Basic Information” of all power stations.

Total PV Generation：The sum of PV generation as counted by PCS in each power station and the cumulative generation of PV grid-tied inverters.

PV Generation Today：The sum of the PV generation of the day counted by PCS in each power station and the daily generation of PV grid-tied inverters.

Refer to the figure below for the specific page display.

Total Battery Charged Energy / Total Battery Discharged Energy：The cumulative charged and discharged energy of the batteries counted by the system since the devices were installed.

Battery Charged Energy Today / Battery Discharged Energy Today：The system's counted battery charged and discharged energy for the current day.

There are four operation states for power station devices in the system to help you quickly understand the current status of devices:

Normal：The device is operating normally and all functions are working properly.

Warning：The device has informational-type abnormal messages that do not currently affect basic operation, but it is recommended to pay attention and check details promptly.

Fault：The device has abnormalities or faults that may affect normal operation; it is recommended to contact maintenance or after-sales personnel as soon as possible.

Offline：The device is currently not connected to the platform, and the platform cannot obtain device data temporarily.

Refer to the figure below for the specific page display.

Profit SummaryUsed to display the overall profit situation of all power stations under the current account.

The page will display accumulated profit and today's profit to help you quickly understand the overall profit performance of the power stations. Meanwhile, the profit chart below visually shows profit trends over different time periods for easy comparison and review.

For more detailed profit data and statistical analysis, click the “More” button at the top right of the page to go to Statistics & Analysis → Profit Reports to view detailed profit information by time dimension.

Refer to the figure below for the specific page display.

Environmental IndicatorsUsed to display the environmental benefits brought by using the system, specifically including:

CO₂ Reduction：The cumulative reduction of carbon dioxide emissions since the system started.

Accumulated Coal Savings：The accumulated amount of coal saved after the system's operation.

Equivalent Trees Planted：The total number of equivalent trees planted calculated based on emission reduction after system use.

See the figure below for specific data displays.

Map

On the map, all bound power stations are shown as coordinate points.

Click any coordinate point and the power station information panel will pop up so you can view detailed information about that power station.

If you want to view a more detailed power station overview, click the “Power Station” button in the panel to go to the station overview page and view all information about that power station.

Power Station Overview

The power station overview page provides the station's real-time operating status and detailed statistics to help you quickly understand the overall performance and energy efficiency. The main contents of the page include the following sections:

Power Station Basic Information：Displays the station's basic configuration data such as PV installed capacity, energy storage installed capacity, and system operating status.

Real-time Power Chart：Shows the station's current power outputs, including PV generation, energy storage discharge, load power, and grid purchase data.

Energy Statistics Chart：Displays the station's power generation and consumption over different time periods. Through the charts, you can clearly see the energy flow among batteries, grid, loads and PV generation.

Today's Data：Details today's energy data such as PV generation, battery charged energy, battery discharged energy, and grid purchased energy.

Cumulative Data：Displays the cumulative PV generation, battery charge/discharge energy, grid energy, etc. since system installation.

Power Chart：Shows the station's operating power over different time periods, including PV generation power, load power, energy storage power and grid energy, helping you understand the station's real-time operating status.

Device Monitoring

The device monitoring page provides detailed information for all bound devices under the power station. Users can view each device's operating status and data in real time on this page to ensure devices are functioning properly.

Display rule description: The system will display based on the actual device types that are connected and present in the customer's power station. If PV equipment is not configured in the station, the “PV Equipment” section will not be displayed; if the station has no diesel generator, the “Diesel Generator Equipment” section will not be displayed.

The page is mainly divided into the following sections: energy storage equipment, meter equipment, PV equipment, diesel generator equipment, and other equipment.

Energy Storage Equipment：This section displays real-time data and status of energy storage related equipment in the station, including inverter telemetry and telecontrol data, working states of storage modules, charge/discharge data, etc.

Meter Equipment：This section shows data related to the station's gateway meters and metering meters.

PV Equipment：Stations with PV equipment will display this section, which shows data related to PV inverters in the station.

Diesel Generator Equipment：Stations with diesel generators will display this section, which shows diesel generator related data.

Other Equipment：Displays data for related equipment such as battery stacks, dehumidifiers, heat pipe equipment, etc.

Statistics & Analysis

Curves

The curves page displays two parts: station power curves and device curves.

Power Curve

The power curve page shows the system’s operation throughout a day to help users intuitively understand energy changes. On this page, users can view key operation data for each subsystem, including SOC, load power, grid feed-in/purchase power, etc. All data are collected and displayed at 5-minute granularity, which can finely reflect the system's operational change trends over a day.

Device Curves

Mainly used to display performance data of the energy storage system over a specific time period. Through this page, users can view operation status and power data of different system components (such as PCS, battery, meters, PV components, etc.). Users can select different “main system” and “subsystem” to view.

The date picker allows users to set the time range of data to view; the time span is less than or equal to 3 days to view the corresponding data.

The menu on the left of the page lists multiple device components such as PCS, battery, PV equipment, etc. Users select different device components to view their power and status data within the specified time period. The selected device will be highlighted in the chart for easy comparison and analysis.

Reports

The reports page displays profit reports and operation reports for the entire power station.

Profit Report

The profit report page is used to show the station's profit situation under different time dimensions to help you clearly understand the economic performance of the energy storage system.

This page supports viewing by month, year and since installation; it can calculate and display the following data: charged energy, charging costs, discharged energy, discharge revenue, and profit. By switching time dimensions, you can compare profit performances across periods for operation analysis and cost assessment. The page also supports data export so current report data can be exported for local saving, reconciliation or further analysis.

Operation Report

The operation report page is used to display the station's operating data over different time ranges to help you comprehensively understand the station's energy usage.

This page supports viewing by month, year and since installation; it can calculate and display the following operating data: PV generation, grid purchased energy, grid feed-in energy, diesel generator generation, energy storage side charged energy, energy storage side discharged energy, load, total charged energy, total discharged energy.

By switching different time dimensions, you can visually compare operations across periods to analyze the station's energy structure and performance. The page also supports data export so current report data can be exported for local saving, data analysis or reporting.

Fault Alarms

The fault alarms page shows real-time and historical faults occurring under the current power station.

Real-time Faults

The real-time faults page is used to display current alarms and fault information occurring at the station to help users promptly understand device anomalies and monitor station operation. The page provides multiple filter conditions and supports filtering by main system, subsystem, device, event code, event category and time range to help users quickly locate faults of interest.

Historical Faults

The historical faults page is used to display alarm and fault records generated during the station's past operation to help users perform retrospective analysis and maintenance management.

The page supports filtering by main system, subsystem, device, event code, event category and time range. Users can quickly query historical fault information for a specified period or device according to actual needs to help fully understand each fault occurrence.